Italit Construction and Development Corporation

Products

PVC Electrical Conduits
- 20, 25, 32, 40, 50, 63, 75, 90, 110, 140, 160, and larger upon request (mm outside diameter)

PVC In-house Blue
- 20, 25, 32, 40, 50, 63, 75, 90, 110, 160 (mm outside diameter)

PVC Sanitary and Sewer (Gravity and Force Mains)
- 1 1/2", 2", 3", 4", 6", 8", 10", 12", 14", 15", 16", 18", 20",22", 24"

PVC Water Mains
- 63, 75, 90, 110, 140, 160, 225, 280, 315, 355, 400, 450, 500, 560, 630 (mm outside diameter)

PVC telecommunication conduits
- Metric sizes same as Electrical Conduits, and ASTM sizes 60.3mm, 73mm, 88.9mm, 114.3mm, 168.275mm, 219.08mm, 273.05mm

PVC cores for industrial uses
- Any of above diameters

High Density Polyethylene Pipes (all materials commercially available: 3408, PE80, PE100)
- SDR 21, SDR 17, SDR 13.6, SDR 11, SDR 9-20mm-630mm
- Any color as required and any length of rolls in 20mm, 25mm, 32mm, 40mm, 50mm, 63mm, 90mm, 110mm, 114.3mm, 118mm,
125mm, 140mm, 160mm (special reels)

The ITALIT Plastic Pipes Division was established in response to the growing demand in the market for high quality water pressure pipes. ITALIT pipe quality control of uPVC and HDPE raw materials blending and pipe manufacturing are continuously monitored and electronically manned by competent quality control personnel. The manufacturing facilities are backed by a complete pipe testing laboratory to assure high quality finished products. With this, the market share of ITALIT Plastic Pipes Division increased from 5% in 1978 to 15% at present, making ITALIT Pipes the leader in the market for high pressure water systems.

Applications
Potable cold water supply systems and well casing Agricultural water supply, sprinkle, and trickle irrigation systems Mining and quarrying slurry transportation Gas reticulation systems Industrial effluents and chemical plants Food processing plants Electrical conduits and telecommunication ducts, and sub-ducts Sewerage systems for industrial areas, drainage systems for housing, and ventilation for office buildings and factories
Characteristics and Advantages
Lightweight - Easy and low-cost handling and transportation Versatile - Increased water delivery at designated pressures & volumes Economical - Low installation cost, corrosion resistance and minimal maintenance maximize savings Non-Conductive - Among safest to install, with no electrolytic corrosion and need for cathodic protection Flexible - Resilience and strength to withstand soil loads and movements; HDPE can even be bent and curved to minimize fittings Mechanically Strong - High tensile and impact strength that prevent denting and flattening under pressure Odorless and Non-Toxic - No harmful effects on drinking water and other potable substances Resistant to High Temperature - Will only soften above 100^oF, well above normal temperature ranges of potable water systems Fireproof - Self-extinguishing properties that will not support combustion Resistant to Chemicals - Highly resistant to common organic and inorganic chemicals, and unaffected by corrosion caused by soil chemicals and sea water Resistant to Weather - No deterioration due to exposure to sunlight, wind or rain

The ITALIT Plastic Pipes Division was established in response to the growing demand in the market for high quality water pressure pipes. ITALIT pipe quality control of uPVC and HDPE raw materials blending and pipe manufacturing are continuously monitored and electronically manned by competent quality control personnel. The manufacturing facilities are backed by a complete pipe testing laboratory to assure high quality finished products. With this, the market share of ITALIT Plastic Pipes Division increased from 5% in 1978 to 15% at present, making ITALIT Pipes the leader in the market for high pressure water systems.

Applications

Potable cold water supply systems and well casing
Agricultural water supply, sprinkle, and trickle irrigation systems
Mining and quarrying slurry transportation
Gas reticulation systems
Industrial effluents and chemical plants
Food processing plants
Electrical conduits and telecommunication ducts, and sub-ducts
Sewerage systems for industrial areas, drainage systems for housing, and ventilation for office buildings and factories

Characteristics and Advantages

Lightweight - Easy and low-cost handling and transportation
Versatile - Increased water delivery at designated pressures & volumes
Economical - Low installation cost, corrosion resistance and minimal maintenance maximize savings
Non-Conductive - Among safest to install, with no electrolytic corrosion and need for cathodic protection
Flexible - Resilience and strength to withstand soil loads and movements; HDPE can even be bent and curved to minimize fittings
Mechanically Strong - High tensile and impact strength that prevent denting and flattening under pressure
Odorless and Non-Toxic - No harmful effects on drinking water and other potable substances
Resistant to High Temperature - Will only soften above 100^oF, well above normal temperature ranges of potable water systems
Fireproof - Self-extinguishing properties that will not support combustion
Resistant to Chemicals - Highly resistant to common organic and inorganic chemicals, and unaffected by corrosion caused by soil chemicals and sea water
Resistant to Weather - No deterioration due to exposure to sunlight, wind or rain

STEEL PIPES

Spiral Welded Steel Pipes
- Theoretically, any outside diameter you require (minimum 8")
- Commercial sizes as follows - 219, 273, 323, 355, 406, 457, 508, 558, 609, 660, 711, 762, 812, 863, 914, 965, 1016, 1066, 1117, 1219,
1320, 1371, 1524, 1625, 1828, up to 3657mm OD

ITALIT Steel Pipes meet the highest operational requirements, and their service life can stretch for many decades. Maintenance costs are in most-cases lower than any other type of water pipes. The high strength of steel pipes leads to high sustained carrying capacity, durability, economy, and reliability. ITALIT Steel Pipes can be installed both above and below the ground with utmost confidence and, whatever your requirements, are assured to give superior results.

Applications
Water distribution lines and irrigation systems Steel poles for electric power transmission and lighting Oil and gas line pipe for petroleum products, LNG, LPG, Oxygen and similar substances Structural pipe for offshore drill rigs and similar structures Piling pipe for buildings, bridges and piers Well casings and structural columns Industrial applications such as mining tailings, dredge piping and pontoons, air lines and ducts, drainage pipes and smoke stacks
Characteristics and Advantages
Greatest tensile strength - Compared to other piping materials used for water lines Durability and long life - Outperform all other types of water-carrying materials, with a conservative useful life of 100 years Economy of maintenance - Usually costs less to buy and install than other piping materials Maximum carrying capacity - Consistently provides greatest possible carrying capacity, with resistance to corrosion and encrustation when properly protected Ductility - Unique property of steel pipes which allow wide use in terrain situations where other pipe materials are impractical or impossible to deploy Reliability - Able to withstand unexpected or emergency situations, and highly resilient to soil movement and surface vibrations Bottle-tight joints - Joints in steel pipes, whether mechanically-welded or gasket type, are completely watertight Customizable - Wide selection of sizes, wall thicknesses and lengths allow pipes to be precisely fabricated for a particular job

ITALIT Steel Pipes meet the highest operational requirements, and their service life can stretch for many decades. Maintenance costs are in most-cases lower than any other type of water pipes. The high strength of steel pipes leads to high sustained carrying capacity, durability, economy, and reliability. ITALIT Steel Pipes can be installed both above and below the ground with utmost confidence and, whatever your requirements, are assured to give superior results.

Applications

Water distribution lines and irrigation systems
Steel poles for electric power transmission and lighting
Oil and gas line pipe for petroleum products, LNG, LPG, Oxygen and similar substances
Structural pipe for offshore drill rigs and similar structures
Piling pipe for buildings, bridges and piers
Well casings and structural columns
Industrial applications such as mining tailings, dredge piping and pontoons, air lines and ducts, drainage pipes and smoke stacks

Characteristics and Advantages

Greatest tensile strength - Compared to other piping materials used for water lines
Durability and long life - Outperform all other types of water-carrying materials, with a conservative useful life of 100 years
Economy of maintenance - Usually costs less to buy and install than other piping materials
Maximum carrying capacity - Consistently provides greatest possible carrying capacity, with resistance to corrosion and encrustation when properly protected
Ductility - Unique property of steel pipes which allow wide use in terrain situations where other pipe materials are impractical or impossible to deploy
Reliability - Able to withstand unexpected or emergency situations, and highly resilient to soil movement and surface vibrations
Bottle-tight joints - Joints in steel pipes, whether mechanically-welded or gasket type, are completely watertight
Customizable - Wide selection of sizes, wall thicknesses and lengths allow pipes to be precisely fabricated for a particular job